SMAW D1.3 (STICK)
AWS D1.3-SMAW CLASS 1
Welding Course – AWS D1.3 - SMAW – Structural Welding Basics:
8 week course/not to exceed 40 Hours. – Hands on Lab 100%.
Monday through Saturday – Student selects class days & times, a minimum of 6 class hours per week is required to stay in class.
COURSE PRICE – $2,500- Includes:
Up to 40 hours if training
Practical welding training - Practice Fillet and Groove joints
Practical Welding Training - Introduction/ practice sheet to sheet and sheet to structural member
Course Description – Training for Certification in AWS D1.3 (Light Gauge Welding) , SMAW Process.
Course Objective – By the end of the class session, the student should be able to weld fillet and butt joints in all positions. The student should be able to apply the proper welding techniques to T joints, Lap joints and Butt joints as needed in the welding industry.
Classroom Instruction: Shop and field safety standards, rules and regulations needed to develop safe work ethics.
Lab/Shop: Hands on welding with F4 (low hydrogen) electrodes and F2 (rutile) electrodes. Proper technique in welding T- Joints and Butt Joints. Instruction required for proper and adequate placement of the weldment in the required test positions.
PROCESSES: SMAW – Stick welding – used widely in the construction industry. It is the most commonly used commercial welding process. The process is used for the fabrication of many items such as buildings, stadiums and bridges in several industries.
AWS D1.3-SMAW CONSTRUCTION/JOB RELATED SKILLS
Welding Course – AWS D1.3 - SMAW
8 week course/not to exceed 35 Hours. – Hands on Lab 100%.
Monday through Saturday – Student selects class days & times, a minimum of 6 class hours per week is required to stay in class.
COURSE PRICE – $2,500- Includes:
Up to 35 hours if training
Practical welding training - Practice 2F, 3F, & 4F Fillet joints & 2G, 3G & 4G Groove welds
Practical Welding Training - introduction/ practice sheet to sheet and sheet to structural member. Students will weld practical applications such as, light gauge studs, stickers and clips as seen on commercial steel stud framing projects.
Course Description – Training for Certification in AWS D1.3 (Light Gauge Welding) , SMAW Process.
Course Objective – By the end of the class session, the student should be able to weld Fillet and Groove welds in all positions. The student should be able to apply the proper welding techniques to T joints, Lap joints, Flare bevel and Flare -V joints as needed in the steel stud welding industry. Those looking to get certified for the steel stud metal framing industry should be able to apply proper welding techniques to studs, stickers and clips.
Classroom Instruction: Shop and field safety standards, rules and regulations needed to develop safe work ethics.
Lab/Shop: Hands on welding with F4 (low hydrogen) electrodes and F2 (rutile) electrodes. Proper technique in welding all applicable D1.3 joints.
PROCESSES: SMAW – Stick welding – used widely in the construction industry. It is the most commonly used commercial welding process. The process is used for the fabrication of many items such as buildings, stadiums and bridges in several industries.
AWS D1.3-SMAW Material Fees
SMAW D1.3 CLASS 1- Included in course price:
F4 & F2 Electrodes- 40 LB
3X3 Galvanized plates - up to 50 pcs
3x3 Mild steel plates - up to 50 pcs
SMAW D1.3 CONSTRUCTION/JOB RELATEDS - $700 Includes:
F4 & F2 Electrodes- 35 LB
3X3 Galvanized plates - up to 40 pcs
3x3 Mild steel plates - up to 40 pcs
3/4" CRC - up to 80 pcs
3x15 x10ga plate- up to 5pcs
16 ga x 2' metal studs - up to 12pcs
.png/:/rs=h:100,cg:true,m)
.jpg/:/rs=h:100,cg:true,m)